6
2. Product Features
Physical
VC-231G
¾ 1 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
¾ 1 RJ11, built-in splitters for POTS connection
¾ Additional splitter for POTS connection
VC-234G
¾ 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
¾ 1 RJ11, built-in splitters for POTS connection
¾ 1 VDSL2 RJ11 female phone jack
Product Features
¾ Cost-effective bridge function to connect two Ethernet LANs
¾ Point-to-multipoint application: Compatible with PLANET
and third-party VDSL2 IP DSLAM for last mile soltuion
¾ Point-to-point application: LAN to LAN extension over phone
wire
¾ Up to 200/160Mbps bandwidth (in G.INP, Sym, 8dB mode)
¾ ITU-T G.993.2 VDSL2 standard
¾ ITU-T G.993.5 G.vectoring and G.INP
¾ DMT-based coding technology
¾ POST splitter to share voice and date
¾ CO/CPE mode selectable via DIP switch
¾ Selectable target band plan (symmetric and asymmetric)
and SNR margin
¾ Half duplex back pressure and IEEE 802.3x full duplex
pause frame ow control
¾ One RJ11 connector for VDSL port with VDSL connection
To Next Page
Loading...
Need help?
General
