Planmeca intra User Manual

TABLE OF CONTENTS
ii Planmeca Intra X-ray Unit
User’s Manual
The manufacturer, assembler, and importer are responsible for the safety, reliability and
performance of the unit only if:
- installation, calibration, modification and repairs are carried out by qualified author-
ized personnel
- electrical installations are carried out according to the appropriate requirements such
as IEC364
- equipment is used according to the operating instructions
Planmeca pursues a policy of continual product development. Although every effort is
made to produce up-to-date product documentation this publication should not be
regarded as an infallible guide to current specifications. We reserve the right to make
changes without prior notice.
COPYRIGHT PLANMECA 2009-01
Publication part number 10006187 Version 19
15.2 Film holder ................................................................................................................... 43
16 SERVICE ........................................................................................................43
17 EXPOSURE VALUE TABLES .......................................................................44
17.1 Exposure values for speed F films ............................................................................... 44
17.2 Exposure values for Dixi2 V1 sensors (high sensitivity) .............................................. 46
17.3 Exposure values for Dixi2 V3 sensors ......................................................................... 48
18 ERROR CODES .............................................................................................50
19 DISPOSAL OF THE UNIT ..............................................................................51
20 TECHNICAL SPECIFICATIONS ....................................................................52
20.1 Technical data .............................................................................................................. 52
20.2 Dimensions (in mm) ..................................................................................................... 54
20.3 User’s statement for Planmeca Intra ............................................................................ 55

Planmeca intra Specifications

General

Manufacturer	Planmeca
Model	Planmeca Intra
Frequency	50/60 Hz
Tube Voltage	60-70 kV
Tube Current	7 mA
Type	Dental X-ray Unit
Voltage	100-240 V
Weight	Varies depending on configuration; refer to specific model documentation