4.1.1. environment condition of usage
Using place : Indoor use
Altitude up to 2,000m
Temperature : 10 - 40 °C
Maximum relative humidity : 30 - 80% R.H.
Atmospheric pressure : 1 - 2 atm.
4.2. What can be sterilized
The STERLINK
®
FPS-15s Plus sterilization system is classified as Class IIb according to MDD
93/42/EEC and the system is intended to be used to disinfect medical devices including invasive
devices.
There are a wide variety of materials and devices that can be sterilized in the STERLINK
®
FPS-
15s Plus sterilizer. As more manufactures complete testing of their products with the sterilizer, the
list of compatible items continues to expand. Information will be updated as new information
becomes available. If the user has any doubt, please contact the medical device manufacturer.
CAUTION! RISK OF DAMAGE ON THE LOAD OR STERILIZER.
Do not attempt to sterilize items or materials that do not comply with the guidelines
specified in this User manual. Consult the medical device manufacturer's instructions
or call your local Plasmapp customer support representative to determine whether an
item can be sterilized by the STERLINK
®
FPS-15s Plus sterilization system.
4.3. Items not to be processed
The following items should not be processed by
the
STERLINK
®
FPS-15s Plus sterilization
system.
∎ Single use items for which the manufacturer does not recommend re-use.
∎ Liquid and powders.
∎ Items or materials that absorb liquids.
To Next Page
Loading...