Plasmapp Sterlink FPS-15s Plus - Cancelling Sterilization Cycle

Rev. 03 / Jan. 2019
Plasmapp Co., Ltd.
STERLINK
®
FPS-15s Plus User Manual
34
5.7. Cancelling sterilization cycle
There may be occasions when the user needs to cancel a cycle before it is completed. Touch
the "STOP" button, and the screen displays a confirmation message. The user have to confirm
the cycle cancellation to stop the cancellation process.
Figure 5.6 GUIs for one of the sterilization process and user confirm
Number
Name
Description
24
STOP
This icon is for cancelling the cycle.
25
Confirm
This icon is for confirming the cancellation.
26
Cancel
This icon is for withdrawing the cancellation.
When the cycle cancellation is initiated, it cannot be stopped by the user. Since the sterilization
cycle is not properly performed.
Figure 5.7 GUIs for one of the sterilization process and user confirm