Plasmapp Sterlink FPS-15s Plus - Reports and Files; Reports

Rev. 03 / Jan. 2019
Plasmapp Co., Ltd.
STERLINK
®
FPS-15s Plus User Manual
42
Chapter 7. Reports and files
7.1. Reports
The cycle report is automatically created and displayed by the STERLINK
®
FPS-15s Plus
sterilizer when the sterilization cycle is completed. The displayed report summarizes the cycle
information of the cycle date, time, process mode and the result of the sterilization cycle.
Figure 7.1 GUIs of cycle summary when the cycle is passed and failed
Number
Name
Description
1
Date
This section displays the date of the sterilization cycle.
2
Cycle time
This section displays time for overall cycle time.
3
Mode
This section displays the mode of the finished sterilization cycle.
4
Result
This section displays the result of sterilization cycle.
5
User confirm
When the user confirm is selected, the screen moves to ready state.
6
Print
When the print is selected, the label printer will print out the
summary of the sterilization cycle information.
7
Caution
This section describes caution information when the sterilization
fails.