Plasmapp Sterlink FPS-15s Plus - Cassette Loading

Rev. 03 / Jan. 2019
Plasmapp Co., Ltd.
STERLINK
®
FPS-15s Plus User Manual
29
5.4. Cassette loading
The STERLINK
®
FPS-15s Plus sterilizer has three different modes which are operated by
using the cassette of the STERPACK
®
, STERPACK
®
Plus and STERLOAD
®
. Place the
cassette in the loading block as depicted in the following figure.
Figure 5.2 Loading cassettes of the STERPACK
®
and STERLOAD
®
WARNING! STERILIZATION SURFACES.
At the end of a cycle, the interior of the sterilizer may be hot. Do not touch the inside of
the chamber or door with your bare or gloved hands. Allow the sterilizer to cool before
touching interior surfaces.
WARNING! HAND CRUSH HAZARD.
The door of the sterilizer is designed to be manually opened and closed, and your hand
can be injured by the door. Keep hands clear when opening or closing the door.