!
+U! HE)QQ7!?O73/A!')!B<5RO<5)!<2R!;263<EE<37. 2 ! S07R)! !
I..P8</W!`206)R!H.536!
You need to loopback any unused ports, including the extender ports. For example, if you are using a
single PSI device you need to loopback the extension ports with three 10-inch MTP cables to make the
following connections:
• EX1-WX1
• EX2-WX2
• EX3-WX3
!
X.22)/3!^0E37PE)!H?;!-)*7/)6!
When use regular 24 fiber LightRail cables to connect multiple PSI devices; three cables to the East PSI
device, three cables to the West PSI device.
X.22)/37.2!-7<T5<1!
The QSFP ports in the diagram include a label indicating direction (W1 through W3 and E1 through E3).
These labels are for informational purpose and are not found on the Plexxi Switch 2e chassis.
!
To Next Page
Loading...