!
"! Plexxi Switch 2e Hardware and Installation Guide! !
()T0E<3.5>!X.1PE7<2/)&
Switch 2e complies with the following regulatory certificates:
CCC
CE
EN 55022:2010/AC:2011
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55024:2010
IEC 61000-4-2 ed2.0 (2008-12)
IEC 61000-4-3 ed3.2 Consol with am1&2 (2010-04)
IEC 61000-4-4 ed3.0 (20012-04)
IEC 61000-4-5 ed3.0 (2014-05)
IEC 61000-4-6 ed4.0 (2013-10)
IEC 61000-4-8 ed2.0 (2009-09)
IEC 61000-4-11 ed2.0 (2004-03)
FCC
NOM
RCM
UL
EN 60950-1:2006/ A11:2009/ A1:2010/ A12:2011/ A2:2013
IEC 60950-1(ed.2), IEC 60950-1(ed.2);am1,
IEC 60950-1(ed.2);am2
VCCI Class A
[XX!@.37/)!
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
!
To Next Page
Loading...