Need help?Do you have a question about the Plexxi Switch 3eq and is the answer not in the manual?
Lists other relevant documentation for Plexxi Switch software and compatibility.
Provides contact information for Plexxi Technical Support services.
Precautions for handling switches to prevent ESD damage when outside a data center rack.
Specific guidelines to avoid electrostatic discharge damage when installing or servicing.
Explains FCC compliance for Class A digital devices and potential interference.
States compliance with Industry Canada Standard ICES-003 for digital apparatus.
Warns about potential radio interference in domestic environments for Class A products.
Tasks to perform before installing the switch, including site verification.
Steps for installing the switch in racks and initial setup procedures.
Checks altitude, temperature, ventilation, and other critical site conditions.
Covers altitude, temperature, ventilation, circuit, grounding, and protection needs.
Details about hot-swappable fans and their airflow direction options.
Lists product codes for different Plexxi Switch 3eq configurations.
Refers to the compatibility matrix for supported cables and transceivers.
Instructions on how to locate and record the switch's MAC address.
Key considerations for power connections, grounding, and surge protection.
Guidelines for handling and connecting optical cables to prevent damage.
Detailed steps for physically mounting the switch in a telco rack.
Details on configuring one or two LightRail fabrics using QSFP28 ports.
Table mapping QSFP28 ports to LightRail connections and directions.
Explains what a Plexxi PSI device is and its role in connecting switches.
Covers connecting PSI devices, required cables, and looping unused ports.
Rules and recommendations for directly connecting switches.
Steps to create a 2-switch Plexxi fabric using direct connect cabling.
Steps to add a seventh switch by re-cabling and adding new connections.
Covers installing QSFP28 transceivers and their configuration details.
Details on connecting QSFP28 cables and using breakout cable options.
Identifies the various ports located on the switch's I/O panel.
Covers QSFP28 ports, LightRails, LEDs, and SFP28 port mapping.
Details the S1 port functionality and its traffic flow indicator LED.
Table describing the states and meanings of P-1, P-2, and STAT LEDs.
States and meanings of the LEDs on the power supply modules.
States and meanings of the LEDs on the fan modules.
Step-by-step instructions for hot-swapping a power supply module.
Step-by-step instructions for hot-swapping a fan module.
Lists key technical specifications for the Plexxi Switch 3eq.
To Next Page
General