Plexxi Switch 3eq - Power Supply LEDs; Fan LEDs

36! Plexxi Switch 3eq Installation Guide (Switch-Control 3.0.0-3.2.x)! !
Power!Supply!LEDs!
Each power supply module has an LED in the lower right corner.
Each power supply LED has the following states:
LED
State
Meaning
PWR1 or PWR2
green
The power supply is plugged in and running.
red
There is no power to that power supply, but there is
power to the other power supply.
off
There is no power to either power supply.
Fan!LEDs!
Each of the fans has an LED as shown here:
The fan LED states are:
LED
State
Meaning
Fan
green
The fan is plugged in and running.
off
The fan is not operating.