Pocketbook 302 - Connection Settings Details; Set Device Name; Mode of Network Access; Choose Preferred Connection

PocketBook 302 User Manual
39
1. SET THE DEVICE NAME
a) tap the corresponding line;
b) an on-screen keyboard appears.;
c) enter the name that will be used to connect POCKETBOOK 302 with other devices;
d) click Enter
to save made changes and Х to hide on-screen keyboard.
2. SET THE MODE OF NETWORK ACCESS
Tap this line in the list of connection parameters, and select one of the following modes:
 off,
 on, or
 permission request.
3. CHOOSE PREFERRED CONNECTION
All available connections will be listed in pop-up list. Select the desired one.
4. SET PIN-CODE FOR CONNECTION POCKETBOOK WITH OTHER DEVICES VIA BLUETOOTH
a) Tap the inscription Bluetooth PIN
b) an on-screen keyboard appears.;
c) enter PIN-code of four characters for connection via Bluetooth;
d) click Enter
to save made changes and Х to hide on-screen keyboard.
5. CONFIGURE GPRS-CONNECTION
a) Open list of GPRS-connections and select the one you want to configure. By default the
not configured connections are called <GPRS Connection No>.
b) Tap Connection name; an on-screen keyboard appears; the name that will be used to
connect POCKETBOOK 302 with GPRS-device; than click Enter
to save made changes,
and Х to hide on-screen keyboard.
c) Click Connect via and select from the list a device with set Bluetooth-connection.
d) Similar to Connection name enter the name of Access point ANP, user name and
password.
e) Set the time for Shutdown if no activity: Tap on Shutdown if inactive (minutes) and
select from the list the desired time.
f) Open the item Network parameters, tap the Configuration of IP address, and select
the following from pop-up window:
 Auto or
 manually.
g) Configure proxy. To do this, enter the menu Proxy Settings and using on-screen
keyboard set all the parameters of proxy connection:
 Proxy-server
 Proxy-port
 Proxy users' name
 Proxy password
h) Finally, verify the connection setup. To do this, tap on Connection test. A dialog
window "Connection setup" appears. If connection is failed you can view the event log.
6. CONFIGURE THE WIRELESS CONNECTION WIFI
a) Open list of wireless connections and select the one you want to configure. By default
the not configured connections are called <wireless Connection No>.