Pocketbook 302 - Set USB Port Connection Mode; Set USB-Host Mode; Service Options

PocketBook 302 User Manual
40
b) Tap Connection name; an on-screen keyboard appears; enter the name that will be
used to connect POCKETBOOK 302 with help of WiFi; than click Enter
to save made
changes, and Х, to hide on-screen keyboard.
c) Similarly to Connection name, enter Network name (SSID).
d) Set a protection type - select from pop-up list one of values:
 non,
 simple (WEP),
 WPA-Enterprise,
 WPA-PSK.
e) Open the item Network parameters, tap the Configuration of IP address, and select
the following from pop-up window:
 DHCP or
 manually.
f) Configure Proxy. To do this, enter the menu Proxy Settings and using on-screen
keyboard set all the parameters of proxy connection:
 Proxy-server
 Proxy-port
 Proxy users' name
 Proxy password
g) Finally, verify the connection setup. To do this, tap on Connection test. A dialog
window "Connection setup" appears. If connection is failed you can view the event log.
7. SET CONNECTION MODE WITH HELP OF USB PORT
Tap USB mode and select from the pop-up list one of values:
 connection to PC,
 charging,
 ask during connect.
8. SET USB-HOST MODE
Tap USB-host and select from the pop-up list one of values:
 off, or
 on.
SERVICE
To go to device service commands, go to section Settings and tap the line Service.