Settings 50
Controls
This section allows you to configure control settings such as:
• Stylus calibration – this section allows you to calibrate your
stylus pen.
• Gesture settings – in this section you can costomize manual
gestures.
By default, upward swipes from the bottom and left-right swipes
from the sides are enabled, while up-down swipes from the sides
are disabled.
Upward swipes from the bottom can be customized for various
functions such as returning to the home page, going back, taking
screenshots, switching tasks, clearing cache, full refresh, E ink cen-
ter, etc.
Up-down swipes from the sides need to be enabled for custom
functions, which can be set for volume, warm light, and cold light.
• Floating ball – The Floating ball can be used to enter shortcuts
such as home, exit, multi-task management, global refresh, screen-
shot, settings, reboot or shutdown, which is convenient and simple.
The Floating ball is on by default, but can be turned off manually
System
This section allows you to configure system settings such as:
To Next Page
Loading...
