Settings 51
• Language – to change the interface language choose any lan-
guage from pre-installed list.
• Date and time – you can set the time to be displayed in 12-
hour or 24-hour format, as well as the date display method.
You can choose to set the time automatically or manually. When
connected to the internet, the automatic setting will match the de-
vice time according to the network time.
For manual setting, you need to set the date, time zone, and time
yourself.
• Input method – this section allows you to customize the on-
screen keyboard.
Firmware update
See current version and release date of the firmware.
To start automatic software update select Check for update.
When checking for updates, your device needs to be connected to
WI-FI, with sufficient storage capacity and over 30% power once
there is an update prompt to update the system.
About the device
Check the basic information of the device such as storage capacity,
system version number, product model, device serial number etc.
To Next Page
Loading...
