Point Mobile PM67 - N6603 Scanner Aiming; Using ScanDemo

PM67 Android 11 User Manual
Scanner
60
© 2021 Point Mobile Co., Ltd. All rights reserved
Scan a Barcode
Point the scanner at the barcode and press any scan button on the PM67. If another button is set as
scan trigger using Program buttons (Refer to Use the Buttons  Program buttons), it can trigger the
scan action, too.
N3601 Scanner SKU (SKU1, SKU2)
Center the green dot aimer over the barcode. The entire barcode must be inside the illumination
square.
Figure 71 PM67 default scan button
Figure 72 Aiming barcode (N3601)