NOTICE
Weight and balance or operating /1mitat1on changes shall be entered m the appropf/ate alfcraft record. An alteration must be
compatible
with all previous alterations to assure continued conformity with the applicable amvorthmess reqwrements.
8. Description of Work Accomplished
I If more space ,s r12qu,red. attach add11tonal sheets Identify with a,rcraft naltonal,ty and reg,strat,on -nark and date ,~ork compre•e1
Repaired Tailboom PIN 212-030-100-177.A, SIN 36106 May 7, 1998 with T.T. unknown.
Vertical Fin Lower
& Upper R/H and L/H Skins PIN 212-030-099-067S & 212-030-099-065S and
212-030-099-105S
& 212-030-099-083S were installed.
Installed Skin PIN 212-030-100-027 and Skin
PIN 212-030-099-071 and Skin PIN 212-030-099-087 and
Skin 212-030-099-089 C/W TB's
# 412-82-11 & TB 412-94-121 & TB 412-94-128 Vertical Fin was
assembled 1/A/W BHT Med.
SR.lv1-l 5 - 6 Repairs Parts & Materials (b) Field Fabricated Parts PP 5-11 and
1/A/W BHT Med. SRM-1
5 -6 Structural Repair (b) Repair Replacement Guidelines, (c) Disassembly and
(d) Structural Alignment PP 5-12 and PP 5-13, using Tailboom Fixture
PIN HWOC 205-212-412 TB
SIN 0157.
Drive System Alignment was performed I/NW BHT 412 MM Vol. 7, Chapter 65 - 15, PP 18-23.
Records of work are on file at Helipro Completions Ltd., 9510 Max Conrad Drive, Spring, Texas 77389,
under Work Order No. 1200.
O Additional Sheets Are Attached
~II S GOVFR•JMFNT PRINTING OFFICE: 1992-769-012
1
60157
To Next Page
Loading...