Pointer Avionics skyhunter 406 - Fleet Operator Options; Skykey Maintenance -Red KEYY:XXM:SH:R:XX; Skykey Programmer-Blue KEYY:XXP:SH:B:TS; Fig. 2 - Skykey Maintenance Programmer-Red, KEYY:XXM:SH:R:XX

).... POIKTEIIA.OOCS ~
SkyHuntcr,40~
MANL:INS:SH:X:XX
1.3 FLEET OPERATOR OPTIONS:
August 8 ,2013
Rev 25
1.3.1 SkyKey Programmer-Blue KEYY:XXP:SH:B:TS
SkyKey Programmer for Fleet Operators, installed in each aircraft and programmed with specific
Aircraft information so that an alternate ELT can be placed on board reducing "down time" for
aircraft. The SkyKey is blue to indicate the additional capabilities it has when used to connect
the Remote Rocker Switch to the Skyhunter 406™.
1.3.2 SkyKey Maintenance -Red KEYY:XXM:SH:R:XX
SkyKey Maintenance Programmer is used to return the SkyHunter 406 TM ELT back to default
settings. After using a SkyKey Maintenance Programmer, the ELT will have to be re-
programmed. The Maintenance Programmer is red to denote that it will remove the aircraft ID
if attached to the SkyHunter 406™.
1-8
Fig. 2 - SkyKey Maintenance Programmer-Red,
KEYY:XXM:SH:R:XX