Polargos SIMPLE MOVE 102 - Page 2

1
EN – Installation and operation guide SIMPLE MOVE 102
EN
Table of contents
Safety precautions 3
Product description 12
- Contents of the complete kit 12
- Dimensions 13
- Scope of application 13
- General overview of the installation 13
- Presentation of the electronic control system 14
Prerequisites for installation 15
- Gate inspection 15
- Stops on the ground 15
- Drive unit location 15
- Preliminary electrical system 15
- Required conductors 16
- Vertical setting 17
- Concrete foundations 17
- Tools required for assembly (not provided) 18
1 Assembly 19
1.1 Screw assembly 19
1.2 Drive fastening 19
1.3 Toothed bar installation 20
1.4 Mechanical adjustment 22
1.5 Drive wiring 23
1.6 Connecting to the 230 V power supply 24
1.7 Earthling of the electronic control system 25
1.8 Position of the electronic control system antenna 25
2 Start-up and standard use 26
2.1 Turning the installation on 26
2.2 Gate track self-learning 26
2.3 Standby / reactivation of the electronic control
system 27
2.4 Plugging the holes 27
2.5 Shield assembly 27
2.6 Complete opening and closing of the gate 28
2.7 Obstacle detection 28
3 Accessories wiring 29
3.1 Photocells (optional) 29
3.2 Orange light (optional) 29
3.3 Battery (optional) 30
3.4 Independent antenna (optional) 30
3.5 Video door phone (optional) 31
3.6 Key switch (optional) 31
3.7 Zone lighting (optional) 31
3.8 Solar energy power supply (optional) 32
4 Advanced parameter settings 33
4.1 Opening for pedestrian entry 33
- Operation of opening for pedestrian entry 33
- Activating of opening for pedestrian entry 33
- Deactivating of opening for pedestrian entry 33
4.2 Automatic closing 34
- Automatic closing operation 34
- Enabling automatic closing 34
- Deactivating automatic closing 35
4.3 Gate opening speed 36
- Scope of application 36
- Setting slow speed 36
- Setting slow speed (continued) 37
- Returning to standard speed 37
5 Programming the remote controls 38
55.1 Presentation of the remote controls 38
- Possibilities for programming
the 2-button remote control 38
- Possibilities for programming
the 4-button remote control 39
- Use of the 3-button remote control 39
5.2 Adding a remote control 40
- 2 or 4-button remote control 40
- 3-button remote control 40
5.3 Deleting a remote control 40
6 Troubleshooting 41
6.1 Support 41
6.2 Replacing the remote control battery 41
6.3 Deleting of settings 42
6.4 Diagnostics 43
7 Technical specifi cations 44