Polaris 2008 ranger 700 xp Service Manual

2.16
GENERAL INFORMATION
2. Check air box. If oil or water deposits are found, drain them
into a suitable container.
NOTE: Service more frequently if vehicle is operated
in wet conditions or at high throttle openings for
extended periods.
3. Install air box cover and secure with clips.
Air Intake Inspection
1. Lift the hood.
2. Inspect the foam inserts in the air baffle boxes. If the foam
inserts are dirty, clean the foam with a high flash point
solvent, followed by hot soapy water.
3. Rinse and dry the foam thoroughly.
4. Inspect the foam for tears or damage. Replace if necessary.
5. Reinstall the foam inserts into the air baffle boxes.
Foam
Air Baffing
Box
Engine Intake Duct
Air Box
PVT Intake Duct

Polaris 2008 ranger 700 xp Specifications

General

Brand	Polaris
Model	2008 ranger 700 xp
Category	Automobile
Language	English