7
9926595 R01 - 2015-2016 RANGER EV Service Manual
© Copyright Polaris Industries Inc.
7.23
2. Install brake line and torque the banjo bolt to the
proper torque specification.
3. Install the pad adjustment screw and turn until
stationary pad contacts disc, then back off 1/2 turn.
4. Perform brake bleeding procedure as outlined earlier
in this chapter.
5. Install wheel and torque wheel nuts to specification
(see Chapter 2).
NOTE
If new brake pads are installed, brake burnishing is
recommended (see procedure Brake Burnishing
Procedure, page 7.18).
BRAKE SYSTEM
To Next Page
Loading...
Need help?
General
