9
2.2 I Electricity supply connec ons
In order to avoid any risk of electrocu on, fi re or serious injury, please follow the instruc ons
below:
• Use of an electrical extension is prohibited when connec ng the control box.
• Make sure that the socket can be easily accessed at all mes and is protected from rain or
splashes.
• The control box is splash-proof, but must not be immersed in the water or any other liquid.
It must not be installed in a fl oodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
• Place the control box near the socket.
• Unscrew the protec ve cap (see gure ).
• Connect the oa ng cable to the control box and lock it in place by turning the ring only in the clockwise direc on (to
prevent damage to the oa ng cable) (see gure
).
• Make sure that the connector is fully pushed in so that no water can get in (see gure
).
• Connect the power cord (see gure
). Only connect the control box to a power outlet protected by a 30 mA
maximum residual current device (if in doubt contact a qualifi ed technician).
To Next Page
Loading...
Need help?
General
