Polaris W Series User Manual

8
❷ Use
2.1 I Immersing the cleaner in the pool
• Roll out the full length of the cable alongside the pool to avoid the cable becoming tangled during immersion (see
 gure
).
• Posi on yourself halfway along the length of the pool before immersing the cleaner (see  gure ). This will op mise
the cleaner's movements and reduce tangling in the cable.
• Place the cleaner ver cally into the water (see  gure
the cleaner's movements and reduce tangling in the cable.
).
• Move it slightly in all direc ons so that the air contained in the cleaner escapes (see  gure ).
• It is essen al that the appliance sinks on its own and se les on the pool  oor. While it is immersed, the cleaner draws
the length of cable it needs into the pool (see  gure
).
Recommended entry point
not recommended
1
2
EN

Polaris W Series Specifications

General

Brand	Polaris
Model	W Series
Category	Swimming Pool Cleaners
Language	English