EasyManuals Logo
Home>Polaris>Swimming Pool Cleaners>W Series

Polaris W Series User Manual

Polaris W Series
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
19
❹ Maintenance
To avoid serious injury:
Disconnect the cleaner from the power supply.
4.1 I Cleaning the cleaner
The appliance must be cleaned regularly using clean or slightly soapy water. Do not use solvents.
Rinse the appliance thoroughly with clean water.
Do not let your appliance dry in the sun by the pool.
Tip: replace the fi lter and brushes every 2 years
You are encouraged to change the lter and the brushes every 2 years to preserve the integrity of the
appliance and guarantee op mum performance.
4.2 I Cleaning the fi lter as soon as the appliance is out of the pool
If the  lter is clogged, clean it with an acidic solu on (spirit vinegar, for example). It is recommended that you do this
at least once a year, since the  lter will clog if not used for several months (winterising period).
2
1
3
5
4
Tip: Check the status of the "fi lter full" indicator
When the LED is lit, it is strongly recommended that you clean the  lter.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris W Series and is the answer not in the manual?

Polaris W Series Specifications

General IconGeneral
BrandPolaris
ModelW Series
CategorySwimming Pool Cleaners
LanguageEnglish

Related product manuals