Polaris W Series - I Cleaning the Impeller

20
4.3 I Cleaning the impeller
To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when maintaining the impeller
.
• Loosen the screw on the grid (see  gure ).
• Remove the grid (see  gure
).
• Remove the  ow guide carefully (see  gure
).
• To remove the impeller, wear gloves and hold the end of the impeller carefully when pushing it (see  gure
).
• Remove all debris (hair, leaves, stones, etc.) which may be blocking the impeller.
EN