Need help?Do you have a question about the Poly CA22CD-SC and is the answer not in the manual?
Poly adopts DECT Forum recommendations for enhanced security in DECT products.
Visual guide and description of the headset remote components and their functions.
Visual guide and description of the headset base station components and their functions.
Lists available spare parts and replacement items for the headset system.
Lists additional accessories available for the headset system, including cables.
Instructions for connecting the system using the console interface cable.
Instructions for connecting the system using the USB cable.
Steps to install the battery and connect the headset to the remote.
Adjust listen volume using the remote's rocker switch for USB connections.
Adjust talk and listen volume using base switches and remote rocker for analog.
Instructions on how to charge the remote and spare battery for initial use and ongoing power.
Guidelines for swapping, charging, and replacing batteries to maintain optimal performance.
How to install a charged battery pack to power the remote.
How to use the Push-to-Talk (PTT) button on the remote to key up your radio.
How to adjust softphone and PC sound volumes for optimal call quality.
Information about range limits and indicators for maintaining a stable audio link.
Addresses the triple beep indication, usually related to lost audio link or nominal setting.
Indicates a low battery warning, requiring charging or battery replacement.
Suggests an obstruction in the charging well as the cause for the flashing charge LED.
Explains that base controls are inactive in USB mode; use remote or software instead.
Suggests batteries may need replacement due to age and reduced charge capacity.
Indicates a potential active link with a previous remote; suggests removing its battery.
To Next Page
General
