Send a Group Page with the Poly Control Panel
Broadcast a page to a configured group paging channel using the Poly Control Panel.
Your administrator can configure the phone to broadcast pages —one-way audio announcements—to
contacts subscribed to a page group. The phone subscribes to a maximum of 25 paging groups. By
default, your phone subscribes to paging groups 1, 24, and 25, and you can send and receive pages to
those paging groups. Contact your system administrator to find out which paging group you are
subscribed to.
Procedure
1 From the top of the system display, swipe down to display the Poly Control Panel.
2 Optional: Swipe down a second time to expand the panel and display the icon names.
3 Select the Group Page icon.
Depending how your administrator configured this feature, you may need to select a group
paging channel.
a. Optional: Select the channel you want to page from the Group Page List.
4 Make the page to the group.
The phone immediately broadcasts it to the paging group.
Call Application Switching Methods
Change the active call application on your phone.
Change call applications using either the Poly Control Panel or cycle between them using the app
switching icon.
If configured by your administrator, you can switch to the Poly OpenSIP call application to place calls if
Teams ever experiences an outage.
•
Select an Available Call Application
Switch directly to another available call application using the Poly Control Panel.
•
Cycle Through Available Call Applications
Cycle through the available call applications using the navigation bar at the bottom of the phone’s
screen.
Poly CCX Phones with Teams
GoMomentum.com/Support | 888.538.3960
To Next Page
Loading...
Need help?
General
