Polycom CX700 - Default Chapter; About this Guide; Changes to this Guide

iii
About This Guide
Thank you for choosing the Polycom® CX700 IP phone which enables a new
era in unified communications currently unavailable with traditional desktop
phones. Connecting a Polycom CX700 phone to Microsoft
®
Lync™ 2010 or to
a computer running Microsoft Lync 2010 allows you to place regular and
Voice over Internet Protocol (VoIP) calls, answer calls, forward calls, keep a
record of all calls, start a conference call, and click to call from a list of your
personal contacts through integration with Microsoft’s Active Directory and
Microsoft Exchange Server. Using your Polycom CX700 phone lets you take
advantage of Microsoft Lync 2010 without needing access to a computer. For
more information on what’s new in Microsoft Lync 2010, refer to
http://www.microsoft.com/en-us/lync/new-features.aspx
This User Guide provides everything you need to quickly use your new
phone. Verify with your system administrator that the network is prepared for
configuring your Polycom CX700 IP phone, you are provisioned in Microsoft
Lync 2010, and your network is correctly configured. As well, read the Parts
List and Safety Notices sections in this guide before you set up and use the
Polycom CX700 IP phone.
Changes to This Guide
The following section was removed for this edition:
• Changing Your Password.