Polycom CX700 User Manual

Getting Started with Your Phone
1 - 3
• Quick Start Guide and registration card
Check this list before installation to ensure that you have received each item.
If you are missing any items, contact your system administrator.
Assembling Your Phone
This section describes how to assemble your Polycom CX700 IP phone:
• Connect handset and headset (optional)
• Connect to the network
• Connect to your computer using USB cable (optional)
• Adjust phone base
If your phone is already assembled, go directly to Features of Your Phone on
page 1-7.
Connecting the Handset and Optional Headset
To connect the handset and optional headset:
1 Connect one end of the phone cord to the handset and the other end of
the cord to the handset jack on the back of the phone.
2 Connect the headset (optional) to the headset jack on the back of the
phone (next to the handset jack).

Polycom CX700 Specifications

Power

power over Ethernet	IEEE 802.3af Class 2
maximum power consumption	13 Watts

LCD Display

display size	5.7 inches
display type	amorphous-TFT Active-Matrix Transmissive
display resolution	320x240

Audio

frequency response	30 – 20kHz
signal-to-noise ratio	78 dB (@ 1kHz)
dynamic range	>80 dB (@ 1kHz)
total harmonic distortion + noise	<0.08% (@ 1 kHz)

Operating Environment

operating temperature range	-10°C to 40°C
relative humidity	80% max (non-condensing)
operating altitude range	-304.8 meter to 3962.4 meter

Weight and Dimensions

dimensions when not tilted	252.7 x 268.6 x 91.3 mm
dimensions when tilted up	193.2 x 268.6 x 192.1 mm
unit weight	2.1 kg
handset weight	200 g
shipping weight	2 kgs