Polycom CX700 User Manual

Customizing Your Phone
2 - 15
Searching For a Contact
To search for a particular contact:
>> From the contact screen, search for a contact using the dial pad.
When a dial pad key is pressed, the entries whose first name starts with a
character that matches the letters on the key label will be retrieved.
For example, if you enter Peter, all entries whose first name is Peter are
listed.
You can dial any successful matches from the resulting information on the
graphic display.
Viewing a Contact Group
To view a Contact Group:
1 On the right-hand side of the graphic display, select
Contact Groups, .
2 Do one of the following steps:
— To view a Contact Group, select the group name.
— To create a Contact Group, select the New Group soft key and follow
the instructions.
— To view all of your contacts, select All Contacts.

Polycom CX700 Specifications

Power

power over Ethernet	IEEE 802.3af Class 2
maximum power consumption	13 Watts

LCD Display

display size	5.7 inches
display type	amorphous-TFT Active-Matrix Transmissive
display resolution	320x240

Audio

frequency response	30 – 20kHz
signal-to-noise ratio	78 dB (@ 1kHz)
dynamic range	>80 dB (@ 1kHz)
total harmonic distortion + noise	<0.08% (@ 1 kHz)

Operating Environment

operating temperature range	-10°C to 40°C
relative humidity	80% max (non-condensing)
operating altitude range	-304.8 meter to 3962.4 meter

Weight and Dimensions

dimensions when not tilted	252.7 x 268.6 x 91.3 mm
dimensions when tilted up	193.2 x 268.6 x 192.1 mm
unit weight	2.1 kg
handset weight	200 g
shipping weight	2 kgs