Polycom G7500 Reference Guide

15
20
30
45
60
120
240
480
sec.web.port
Specifies the port to use when accessing the system web interface over HTTP. If you change
the default, port 80, specify port 1025 or higher and make sure it is not already in use. (This
parameter is overridden if security.remoteaccess.web.httpsonly="1".)
Port number (length: at least 1)
80 (default)
sec.usb.disableAll
Set to "1" to prevent use of the system's USB 3.0 ports.
(The USB-C port, which only provides power, can't be turned off.)
0 (default)
1
sec.TLS.cert.sslVerificationDepth
Specifies how many links a certificate chain can have. The term peer certificate refers to any
certificate sent by the far-end host when a network connection is being established between the
two systems.
0
1
2 (default)
3
4
5
6
7
8
9
10
11
12
sec.TLS.cert.validatePeer.enable
Determines whether your system requires a remote server to present a valid certificate when
connecting to it for services, such as provisioning.
Security Parameters
Polycom, Inc. 66

Polycom G7500 Specifications

General

Bluetooth	Bluetooth 5.0
Power Supply	100-240V AC, 50/60 Hz
Audio Features	NoiseBlockAI, Acoustic Fence
Content Sharing	Yes, wired and wireless
Camera	Polycom EagleEye IV or EagleEye Cube
Microphone	Integrated beamforming microphone array
Connectivity	HDMI, USB, Bluetooth, Wi-Fi
Video Standards and Protocols	H.264 AVC, H.265
Video Input	HDMI
Video Output	HDMI
Audio Standards	G.711, G.722, G.722.1, G.729
Audio Input	HDMI
Audio Output	HDMI
Network Protocols	IPv4, IPv6
Wireless	Wi-Fi 802.11a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Resolution	3840 x 2160
Display	External display required
Compatibility	Microsoft Teams, Zoom
Video Resolution	Up to 4K
Operating System	Polycom RealPresence