This parameter is supported when using a camera with tracking features, such as the EagleEye
Director II.
True (default)
False
video.camera.[index].saturation
Specifies the intensity of the video color.
Use this to configure the camera type identified with the video.camera.[index].type parameter.
Integer (0-14)
6 (default)
video.camera.[index].trackingMode
Specifies the tracking mode used by the EagleEye Director II or EagleEye Producer camera:
Use this to configure the camera type identified with the video.camera.[index].type parameter.
FrameSpeaker (default) - Enables the automatic locating and framing of the active speaker.
When someone else starts speaking, the camera switches that person. Note that when the local
microphone is muted, the camera tracking mode automatically switches to "FrameGroup."
FrameGroup - Enables the automatic locating and framing of participants in the room without
displaying camera motion.
FrameGroupWithTransition - (EagleEye Producer camera only) Enables the automatic locating
and framing of participants in the room while displaying camera motion. For example, if
someone enters the room, you might see the camera pan until that person is in view.
Off - Disables automatic tracking. All camera control must be handled manually.
video.camera.[index].trackingSpeed
Determines how quickly an EagleEye Director II or EagleEye Producer camera finds and
switches to the new speaker. The room environment can influence how fast new speakers are
located.
Use this to configure the camera type identified with the video.camera.[index].type parameter.
Normal (default)
Slow
Fast
video.camera.[index].videoQuality
Sharpness - Gives preference to resolution over frames per second. With this setting, moderate-
to-heavy motion at low call rates can cause some frames to drop.
Motion - Gives preference to frames per second over resolution.
Use this to configure the camera type identified with the video.camera.[index].type parameter.
Sharpness (default)
Motion
video.camera.[index].whiteBalanceMode
Specifies how the camera compensates for light source variations in the room. Use this to
configure the camera type identified with the video.camera.[index].type parameter.
Fixed color temperature values are measured in Kelvin and correspond to the color of ambient
light in a room.
Video Parameters
Polycom, Inc. 92
To Next Page
Loading...
Need help?
General
