Polycom SoundStation IP 4000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
1 - 4
The following figure shows how to connect your phone to the network using
optional AC power.
To connect the phone using AC power:
1. Connect one end of the 25-foot Network Cable to the LAN jack on the
phone.
2. Connect the other end of the 25-foot Network Cable to the
Power Insertion Cable.
3. Connect the Power Insertion Cable to an available LAN port on the wall
or hub/switch device port.
4. Connect the Power Adapter to the Power Insertion Cable.
5. Connect the Power Adapter (with the attached Regional Power Cord) to
the wall outlet.
Connecting Optional Extension Microphones to Your Conference Phone
You can connect extension microphones to expand the room coverage of your
conference phone.
To connect extension microphones to your phone, you will need the optional
External Microphone Kit, which contains two extension microphones.
2
3
4
5
1
Power Adapter
Power Insertion Cable
25-foot Network Cable

Polycom SoundStation IP 4000 Specifications

General

Brand	Polycom
Model	SoundStation IP 4000
Category	Conference Phone
Language	English