Figure 10 – Adding/Editing Users
Define the “First Name” and “Last Name” as you deem appropriate. ShoreWare Director will auto-assign the next
available “Number” (i.e., extension), but you can modify it to any available extension. Define the “License Type”
as needed; in this example we chose “Extension and Mailbox” although it’s not necessary to have a mailbox.
Define the proper “User Group” and set the “Home Port” to “Any IP Phone.”
Note: If you configured the “License Type” for “Extension-Only,” you cannot select “Any IP Phone”
but instead must set the “Home Port” for the “SoftSwitch” selection. Save your changes, then scroll down to
the “SIP Password:” section (Figure 11).
To Next Page
Loading...
