Polycom VVX 501 Quick Start Guide

Guided Setup
Attach Stand
Attach the stand as shown below.
Connect Handset and Optional Headset
Note: Your phone supports wired headsets, including electronic hookswitch (EHS) headsets.
For connection directions, refer to your headset documentation.
2
Note:
To ensure adequate support,
fully insert the stand into one of the
slots on the back of the phone.*
Note:
Your phone
supports wired and
wireless headsets,
including electronic
hookswitch (EHS)
headsets.
For connection
directions, refer to
your headset
documentation.
Standard headsets
typically use the
RJ-9 or USB port,
while EHS headsets
use the RJ-9 and
serial port.
RJ-9 port
Serial port

Polycom VVX 501 Specifications

General

Touchscreen	Yes
Bluetooth	No
Wi-Fi	No
Wireless LAN	No
Video Support	No
Connectivity	Ethernet, USB
Audio Features	Acoustic Clarity Technology
Lines	Up to 12 SIP accounts
Ports	2 x Ethernet, RJ-9 headset port, USB
Power	Power over Ethernet (PoE) or AC adapter
Audio Codecs	G.711, G.722, G.729A, iLBC
Speakerphone	Full-duplex
Network Interfaces	10/100/1000 Mbps Ethernet
Dimensions	190 x 150 x 180 mm
Weight	Approx. 900 g