110-392 3
Introduction
DuraChill Chillers provide cooling power for demanding applications and serve as an economical alternative to tap
water cooling systems. All models feature a microprocessor-based controller, digital Temperature Display (°C or
°F), one-touch set point display, and digital Pressure/Flow Rate Display (PSI, kPa, GPM, LPM) with push-Button
selection. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated
refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended.
General Safety Information
When installed, operated, and maintained according to the directions in this manual and common safety
procedures, your Chiller should provide safe and reliable temperature control. Please ensure that all individuals
involved in the installation, operation, or maintenance of this Chiller read this manual thoroughly prior to working
with the unit.
This symbol alerts you to a wide range of potential dangers. When attached to the unit, consult the operator's
manual.
This symbol advises danger from electricity or electric shock.
This symbol indicates that a hot surface may be present.
This symbol marks information that is particularly important.
This symbol indicates alternating current.
/
These symbols on the Power Switch / Circuit Breaker indicate that they place the main power supply ON / OFF.
This symbol on the Power Key (if present) indicates that it places the unit in a standby mode. It DOES NOT
fully disconnect the unit from the power supply.
Read all instructions pertaining to safety, set-up, and operation.
Proper operation and maintenance is the user’s responsibility
Safety Recommendations
It is the user’s responsibility to read and understand all instructions and safety precautions included in this manual
prior to installing or operating this equipment. Contact our Customer Service Department with any questions
regarding the operation of this Chiller or the information contained in this manual.
WARNING: Installation, operation, or maintenance of this equipment should be performed in strict
accordance with the instructions outlined in this manual. Failure to follow those instructions may increase
the risk of personal injury, damage the equipment, and/or void the warranty.
To Next Page
Loading...
Need help?
General
