82
• “Eraser widths”: Erasures are based on a calculated diame-
ter around a single point of contact on the board. Specify the
eraser width for the large or small eraser.
To restore factory default options:
• Click “Restore Defaults.”
Customizing Sounds (TS Models Only)
Audible feedback on Webster TS models indicates which tool you are
using. (Webster LT sounds cannot be customized.) By default, the TS
whiteboard emits sounds:
• On startup and shutdown
• Selecting a tool (pen or eraser)
• Using an eraser function
• Touching or writing on the whiteboard
You can change the sounds associated with functions or turn them
off.
note:NOTE:
If you turn sounds off, the board no longer provides audible feedback
that a particular tool is in use, that the whiteboard is communicating
with your computer or that an error exists. We recommend that you
not customize sound settings until you are thoroughly familiar with
Webster.
To customize Sound settings:
1 Choose “Options” (Windows) or “Preferences” (Macintosh) from
the Edit menu.
Webster_draft2.book.mif Page 82 Friday, October 11, 2002 10:07 AM
To Next Page
Loading...