This function is for programming the Start/Stop timing. You can programme up to 3 different Start/Stop timings. Setting
is as follows:
Refer to the following section to activate the programme
Step 1: Long press 3s to enter into timer functions
Step 2: Select the programme to be congured with the buttons and .
Step 3: Press to programme the start time.
Step 4: Adjust the hours with the buttons and .
Step 5: Press to switch to minutes.
Step 6: Adjust the minutes with the buttons and .
Step 7: Press to programme the stop time.
Step 8: Adjust the hours with the buttons and .
Step 9: Press to switch to minutes.
Step 10: Adjust the minutes with the buttons and .
Step 11: Press to return to the main screen.
4. Use
4.8 Programming Start/Stop
NB: The remote control
returns automatically to
the main screen after 10
seconds.
Step 3 Step 4Step 2Step 1
Step 7
Step 11
Step 8Step 6
Step 10
Step 5
Step 9
3s
To Next Page
Loading...
