▪ Using the arrow key [up], return to the [START] field (16) and return to the start menu
using the [Enter key].
Creating a log file:
▪ Open the USB socket cover at the side of the housing.
▪ Connect the USB stick (FAT32 compatible) to the USB port.
▪ Navigate to the [Client menu] (see "User settings" for description).
▪ Using the arrow key [up], navigate to the [Log file: / OFF] field and press the [Enter key].
▪ Using the arrow key [up / down], set the value to [ON].
▪ Press the [Enter key].
▪ Using the arrow key [up], navigate to the [NEW] field and press the [Enter key] → The
log file will be saved, increasing the number of log files by 1.
– Each time the [Enter key] is pressed, the number of log files will increase by 1, which
makes it possible to create a new log file for each volume unit (packing unit).
Wait approximately another 15 secs after the last splitting process.
▪ Using the arrow key [up], return to the [START] field and return to the start menu using
the [Enter key].
▪ Disconnect the USB stick at the side of the housing.
▪ Close the cover of the USB socket again.
Special equipment
48
To Next Page
Loading...
Need help?
General
