Visual positioning is only an auxiliary flight function, please always pay attention to the changes in
the flight environment and positioning mode, and do not rely too much on the automatic judgment
of the aircraft. Users need to control the remote at all times and be prepared to operate the aircraft
manually at any time.
The Vision System cannot work properly in any of the following situations
1. Pure-color surface.
2. Surface with strong reflection, such as smooth metal surfaces.
3. Transparent object surface, such as water surface and glass.
4. The moving texture, such as running pets and moving vehicles.
5. Scenarios with drastic change of light; For example, the drone flies to outdoor space with strong
light from indoor space.
6. Places with weak or strong light.
7. The surface with highly repetitive texture, such as floor tile with the same texture and small size,
and highly consistent strip pattern.
For the sake of safety, please check the camera and TOF transceiver tube before the flight, and
clean it with a soft cloth if there is any dirt, dust, or water on it;
Contact Potensic Support if there is any damage to the Vision System.
10
4.3 Drone Status Indicator
Startup / Shutdown in progress: Green indicator is solid on
Flight
status
GPS positioning Vision positioning Attitude mode Return
Indicator flashes
slowly in green
Indicator flashes
slowly in cyan
Indicator
flashes slowly
in blue
Indicator
flashes slowly
in red
Warning &
Error
Remote controller
has no connection
with the drone
(communication lost)
Low battery Sensor error
Emergency stop
of propeller
Indicator is in
solid blue
Indicator flashes
quickly in red
Indicator is
in solid red
Indicator repeatedly
lights up shortly in red
then goes off long
Upgrade &
calibration
Compass calibration
(horizontal)
Compass calibration
(vertical)
Frequency
pairing mode
Upgrade
mode
Indicator has
alternative flashing
between red and green
Indicator has alternative
flashing between blue
and green
Indicator flashes
quickly in green
Indicator flashes
quickly in blue
Start-up/
Shut-down