Important
A setting between 50 and 60°C is recommended for domestic
water heating.
Times for domestic water heating are set in time program 4 /
DHW.
For reasons of convenience, domestic water heating should
start approx. 1 h before central heating commences.
Important
Legionella function
Each Sunday during the first charge of the DHW tank, the
legionella function is activated; this means the DHW ist being
heated up to 65 °C once for eliminating the existing legionellas.
8.8
Adjusting comfortable room setpoint
How to adjust the comfortable room setpoint is described here.
1. Set the comfort setpoint using the control knob.
=> The value is taken over automatically.
8.9 Setting reduced room setpoint
How to set the reduced room setpoint is described here.
1. Press OK.
2. Select the Heating circuit menu item.
3. Press OK.
4. Select the Reduced setpoint parameter.
5. Press OK.
6. Set the reduced setpoint at the control knob.
7. Press OK.
8. Leave the programming level by pressing the operating mode key for
heating mode.
8.10 Pump setting (pumped heating circuit)
A hydraulic design calculation of the system is required for the correct
setting of the pump modulation.
8 Operation
7703046 - 01 - 23072018 Paramount five 30 – 115 59
To Next Page
Loading...
