Pottinger SERVO 45 - Additional Devices; Setting the Disk Coulter; Spring Loaded Disk Coulter

GB
- 20 -
(* Beware! Danger of injury on the cutting edges.
0600_GB-ZUSÄTZE_983
aDDiTiOnaL DEViCEs
• Set the cutting depth of the disk coulter at a gap of 5 cm to the
ploughing blade tip.
• The lengthwise fitting position is preselected by moving the carrier
on the console.
Further fitting positions arise by swivelling the eccentric (50)
180°.
Setting the disk coulter
(*
• The lateral gap to the ploughing blade tip should be 2 - 3 cm. It is
set by swiveling the eccentric (50).
Spring loaded disk coulter
(*
Up to 2004 model From 2004 model