Pottinger SERVO 45 - Variation; SERVO Model; SERVO NOVA Model; SERVO PLUS Model

GB
- 38 -
9600-GB VARIANTEN (955)
VariaTiOn
SERVO model
Standard plough
consisting of
a. Standard cutting width adjustment
5 settings possible using screws
b. Four-bar lever
A standard plough variation
consisting of
a. Standardcutting width adjustment
5 settings possible using screws
b. -
c. Hydraulic cylinder
to swing the plough frame
This allows 4 and 5 blade ploughs to turnover problem-free.
Only
one double-action servo-valve is necessary on the tractor.
This servo-valve looks after the hydraulic cylinder (c) and the
turning gear cylinder simultaneously.
SERVO NOVA model
- as with the SERVO model however with an additional fully-
automatic overload safety device.
SERVO PLUS model
A standard plough variation
consisting of
a. -
b. Four-bar lever
c. -
d. Hydraulic cutting width adjustment
- unlimited setting possible using hydraulic cylinder.
- an additional double-action servo-valve is necessary.
Unlimited cutting width setting can also be carried out during
ploughing.
Advantages:
- Accurate ploughing along borders.
- Plough around obstacles (poles, trees, etc.).
e. Memory hydraulic cylinder (alternative to "d")
Advantages:
- as in point "d"
+ for swinging the plough frame
This allows 4 and 5 blade ploughs to turnover problem-free.
SERVO NOVA PLUS model
- as with the SERVO PLUS model however with an additional
fully-automatic overload safety device.