4
Safety
Powered by Safety
®
Circuit Breaker Monitor
01.4IB.48070A
c. GenerAl
1. Only supervised and qualified personnel
trained in the usage, installation, operation,
and maintenance of the circuit breaker
monitor shall be allowed to work on this
equipment. It is mandatory that this
instruction bulletin, any supplements, and
service advisories be studied, understood,
and followed.
2. Maintenance programs must be consistent
with both customer experience and
manufacturer’s recommendations,
including service advisories and instruction
bulletin(s).
A well planned and executed
routine maintenance program is essential
for equipment's reliability and safety.
3. Service conditions shall also be considered
in the development of safety programs.
Variables include ambient temperature;
humidity; actual continuous current;
thermal cycling; number of operations;
interrupting duty; and any adverse local
conditions including excessive dust, ash,
corrosive atmosphere, vermin and insect
infestations.
d. SpecIfIc
1. DO NOT WORK ON ENERGIZED
EQUIPMENT. If work must be performed
on a circuit breaker, remove it from
service and remove it from the metal-clad
switchgear.
2. DO NOT WORK ON A EQUIPMENT WITH
THE CONTROL CIRCUIT ENERGIZED.
3. ALL COMPONENTS SHALL BE
DISCONNECTED BY MEANS OF A VISIBLE
BREAK AND SECURELY GROUNDED FOR
SAFETY OF PERSONNEL PERFORMING
MAINTENANCE OPERATIONS ON THE
EQUIPMENT.
4. Interlocks are provided to ensure the
proper operating sequences of the
equipment and for the safety of the user.
If for any reason an interlock does not
function as described, do not make any
adjustments, modification, or deform the
parts. DO NOT FORCE THE PARTS INTO
POSITION. CONTACT POWELL FOR
INSTRUCTIONS.
e. SAfety lABelS
The equipment described in this document
has DANGER, WARNING, CAUTION, and
instruction labels attached to various locations.
All equipment DANGER, WARNING, CAUTION,
and instruction labels shall be observed
when the controller is handled, operated, or
maintained.
Warning and Caution labels are located in
various places. Do NOT remove or deface any
of these warning/caution labels.
To Next Page
Loading...