SD700 – TOUCH-GRAPHIC DISPLAY
POWER ELECTRONICS
58
SMS SERVICE
3.4.4. Considerations on Message Sending
Non registered User tries to use the Service
A non registered user sends a query to the graphic display:
MOTOR
The graphic display will ignore the user command and will not respond anything to this non
registered user.
User2 tries to start the motor
User2 sends the start command to the drive through SMS message:
STR
The graphic display will respond to User2 the next:
DRIVE01. ERROR. User is not allowed to perform the request action.
User1 makes a typo
User1 tries to send message MOTOR to the drive, but he makes a typo:
MOTPR
The graphic display will respond:
DRIVE01. ERROR. There isn’t any command with that name.
To Next Page
Loading...
