PowerBox Systems Mercury SRS User Manual

-20-
Operate the appropriate transmitter switch, and the PowerBox automati-
cally detects it as the switch which you have assigned to the retract system.
The on-screen arrows should now be located in front of UP/DOWN. If you
find that your retract switch works in the wrong “sense” (direction), correct
it by reversing that output at the transmitter.
Press the SET button again to proceed.
The door sequencer’s method of working is determined in the following
menu:
The following sequences are available:
Mode 1:
Extend undercarriage:
Open wheel doors → extend undercarriage
Retract undercarriage:
Retract undercarriage → close wheel doors
Mode 2:
Extend undercarriage:
Open nosewheel doors → extend nosewheel
Open main wheel doors → extend main undercarriage → close main
wheel doors
Retract undercarriage:
Retract nosewheel → Close nosewheel doors
Open main wheel doors → retract main undercarriage → close main wheel
doors

PowerBox Systems Mercury SRS Specifications

General

Voltage	4 - 9 V
Type	Radio-Controlled (RC) Model Parts
Proper use	Airplane
Product type	Power supply
Compatibility	Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Product color	Black
Brand compatibility	Any brand