35
Table of Contents To navigate between hyperlink topics using a keyboard, select ALT+◄ or ALT+►.
5. Place a funnel into the oil reservoir and rell with the recommended oil. Do not overll.
6. After relling, insert the dipstick back into the oil reservoir, remove it, and check the oil level. (To ensure an accurate reading,
do not tighten or screw the dipstick into the reservoir.) Ensure that the oil level is at the top of the etching on the dipstick.
Full oil level
at top of etching
7. Reinsert and tighten the dipstick in the oil reservoir.
8. Reinstall the maintenance cover and screw back onto the generator.
The low oil alarm system automatically stops the engine before the oil level falls below a safe limit. However, to
avoid the inconvenience of an unexpected shutdown, visually inspect the oil level before each use.
Extreme Temperatures | Maintenance Schedule
To Next Page
Loading...
