43
Table of Contents To navigate between hyperlink topics using a keyboard, select ALT+◄ or ALT+►.
No Output at the DC Receptacle
NO
YES
Reset the DC circuit breaker.
PH2400PRi/E Control Panel
Is the DC circuit breaker tripped "OFF"?
Take the generator to an authorized
POWERHOUSE® service center.
Find a Service Center
Engine Does Not Start with Remote Key Fob
NO
YES
Set the remote switch to the ON position.
Remote Startup
Is the remote switch in the ON position?
YES
NO
Contact POWERHOUSE
®
customer support
at (877) 544-4449 for a replacement remote
receiver with matching remote key fob.
NO
Set the ignition key to the OFF position.
YES
Insert a fully charged battery.
NO
YES
See Engine Will Not Start.Does the generator start with the ignition key?
Is the ignition key in the OFF position?
Is the remote fob battery weak, intermittently
working, depleted, or missing?
To Next Page
Loading...
