To Next Page
C
connerlauraJul 31, 2025
What to do if my Powerhouse Inverter engine will not start?
- JJose GrossJul 31, 2025
If your Powerhouse Inverter's engine won't start, try these steps: First, make sure the ignition key or remote switch is in the correct position. Next, fully charge the battery. Inspect all connections between the battery, control panel, and electric starter. Check the battery fuse to ensure it's present and not burned out. Refuel the tank and add the recommended oil. Clean or replace the fuel and air filters. Replace the spark plug and check for spark.
General
