11
DigiMod PFC2 - PFC4 | SERVICE MANUAL
INDEX
Checking the PFC converter
15Vdc 27.5mA
This step is common to both PFC2 and PFC4 models.
By means of the DigiMod PSU AUX Voltage Cable,
connect a DC Power supply to the module’s PL1
connector and supply 15Vdc.
With an oscilloscope, probe on the points highlighted on
(Fig. 13), and check if the wave matches the one in the
picture.
(Fig. 13)
Model Kit Number Description
DigiMod PFC2
KT000890.R KIT DM PFC2 PSU
DigiMod PFC4
KT000843.R KIT DM PFC4 PSU
Please refer to the following table when ordering the
repair Kit.
12 Vp 43 KHz
To Next Page
Loading...
