powersoft DigiMod PFC2 - KT000291 Interface Board; Switching the Module on in AC - 8Ω LOAD CONNECTED (1 KW Max Power) AT000043

21
DigiMod PFC2 - PFC4 | SERVICE MANUAL
INDEX
CH 1
PL 1
PL 4
CH 3&4
CH 1&2
CB000350
CH 4
SW3/4
SW1/2
CH 3
PL 3
PL 2
Testing point
Input connectors
Link switches
Output connectors
CH 2
Link CH1 + CH2
Link CH3 + CH4
Single channel Mode
Single channel Mode
KT000291 Interface Board
Switching the Module On in AC - 8Ω LOAD CONNECTED (1KW max power) AT000043
Connect a Variac to the CN8 (PL15/16) connector and
slowly increase the voltage to 100 VAC